| |
Description |
Part No. |
| Manufacturer's Test Report |
Test results reported by manufacturer of the product |
939911 |
| Chemical & Physical Test Report |
Internally Threaded Fasteners/Washers |
939900 |
| Chemical & Physical Test Report |
Externally Threaded Fasteners/Washers |
939902 |
| Case Depth |
Per SAE J423 |
934800 |
| Chemical Analysis |
Alloy Steel |
937923 |
| Chemical Analysis |
Carbon Steel - C, Mn, P, S, Si |
937924 |
| Chemical Analysis |
Stainless Steel 300/400 Series |
937925 |
| Contoureader Tracing |
Tracing with Autographic Printout |
933111 |
| Contoureader Tracing |
Thread Tracing with Master Chart Overlay |
933121 |
| Decarburization/Carburization Report |
Sample Sectioning, Mounting, Polishing, & Etching. Per SAE J121, J121M, J419; ASTM A574, F835, F835M |
934901 |
| Examination for Laps on Thread |
Section, Mount & Polish |
934904 |
Hardness Core
(Rockwell: HRC, HRB, 15N, 30N) |
Nuts/Bolts 1/4" through 1" |
937111 |
Hardness Core
(Rockwell: HRC, HRB, 15N, 30N) |
Nuts/Bolts 1 1/8" through 2" |
937112 |
Hardness Core
(Rockwell: HRC, HRB, 15N, 30N) |
Non-Fastener |
937113 |
Hardness Surface
(Rockwell: HRC, HRB, 15N, 30N) |
Nuts/Bolts 1/4" through 1" |
937121 |
Hardness Surface
(Rockwell: HRC, HRB, 15N, 30N) |
Nuts/Bolts 1 1/8" through 2" |
937122 |
Hardness Surface
(Rockwell: HRC, HRB, 15N, 30N) |
Non-Fastener |
937123 |
| Magnetic Particle Test |
Bolts per SAE J1061 |
934111 |
| Magnetic Particle Test |
Bolts per SAE J123 |
934131 |
| Magnetic Particle Test |
Bolts per ASTM F788 |
934132 |
| Magnetic Particle Test |
Nuts per SAE J122A |
934263 |
| Magnetic Particle Test |
Nuts per ASTM F812 |
934264 |
| Plating Thickness Measurement |
Thickness Measured from 0 to 2 Mil (Zn Fe & Cd Fe) |
936111 |
Proof Load Test - 400,000 lb. max capacity
(Externally Threaded) |
Bolts 1/4" through 3/4" |
932213 |
Proof Load Test - 400,000 lb. max capacity
(Externally Threaded) |
Bolts 7/8" through 1 1/4" |
932223 |
Proof Load Test - 400,000 lb. max capacity
(Externally Threaded) |
Bolts 1 3/8" through 2" |
932233 |
Proof Load Test - 400,000 lb. max capacity
(Externally Threaded) |
Nuts 1/4" through 3/4" |
932211 |
Proof Load Test - 400,000 lb. max capacity
(Externally Threaded) |
Nuts 7/8" through 1 1/4" |
932221 |
Proof Load Test - 400,000 lb. max capacity
(Externally Threaded) |
Nuts 1 3/8" through 2" |
932231 |
| Salt Spray Test |
Per ASTM B117 |
935120 |
| Surface Discontinuity Measure |
Depth & Width (Crack or Seam) |
934903 |
| Surface Roughness Test |
Per ASTM B46.1 |
935700 |
Tensile Test - 400,000 lb. max capacity
(Wedge, Axial) |
Bolts 1/4" through 3/4" |
932011 |
Tensile Test - 400,000 lb. max capacity
(Wedge, Axial) |
Bolts 7/8" through 1 1/4" |
932021 |
Tensile Test - 400,000 lb. max capacity
(Wedge, Axial) |
Bolts 1 3/8" through 2" |
932031 |
| Tensile Test - Machined Specimen |
J429 / F606 / A370 |
932411 |
